inches long x ordered by relativity

Features:

1/2-inch Drive 17-piece Metric Socket Set

17-piece 1/2-inch drive metric socket set
Fourteen (14) sockets sized from 15mm to 28mm
Push-button ratchet
Breaker bar
5-inch extension
All sockets are 6-point
Manufactured with heat-treated chrome vanadium steel
Packaged in blow-molded case

1000-pound Engine Stand

Perfect for rebuilding or overhauling a project motor or storage, this rolling engine stand can support up to 1000 pounds of small or big-block iron. This engine stand features a 360 degree rotating head and six lockable positions.

Supports up to a 1000 pound engine
360 degree rotating head
Six lockable positions
Rolling casters for easy mobility in the garage
Perfect for storing or working on small blocks

12-ton Hydraulic Pipe Bender Roll Cage

Pipe bender roll cage bends five different diameters of pipe
Hydraulic tool has a 12-ton capacity
Tube bender is perfect for fitting all types of conduit and tubing
Bends 1/2, 3/4, 1-1/4, 1-1/2 and 2-inch tubing
Bending bars can be adjusted to distance of 8-1/2, 11-1/4, 12, 16-3/4, 19-1/2 and 22-1/4 inches
Steel frame is 24 inches wide x 6.5 inches deep x 21.5 inches high
Jack capacity: 13-1/4-inch minimum, 22-3/4-inch maximum, 9-1/2-inch stroke
Shipping weight is 117 pounds
Perfect for all types of automotive applications

12-volt heated Pad with Safety Timer Red Plaid

Heated pad is ideal for travel
Car appliance features a 12-volt operation
Heat pad is just large enough to warm your seat, lap or back
Made of high-quality polyester fleece
Great for cold morning starts
Features patented 30 or 45 minute timer with auto shut-off
Reset button
Features a 8-foot fused cord with automatic temperature control
LED indicator light
Available in red plaid color option
Dimensions are 16 inches x 16 inches

1500lb 2 in 1 trailer jack

Trailer jack fits up to 3x5-inch frame
Jack features a 5.5-inch swivel wheel for easy maneuverability
Interchangeable flat foot plate measures 3.5 inches x 7 inches
Trailer jack part number TJ1500

16-ton Hydraulic Tubing Bender Roll Cage

Tube bender roll cage handles pipe up to 3 inches diameter
Portable tube bender make bending pipe precise
Hydraulic tool is perfect for bending gas, water and electrical conduit
Hydraulic jack as a 16-ton capacity
Works with sizes from 1/2-inch to 3-inch pipe
Bends to 90 degrees
Roller adjustments: 8-1/2, 11-7/16, 14-3/8, 17-1/4, 20-1/4 and 23-1/8 inches
Die sizes: 1/2, 3/4, 1, 1-1/2,1-1/4, 2, 2-1/2 and 3 inches
Jack has 9.5-inch stroke

2-in-1 Power Station

Power station includes a 12V jumper starter with air compressor
Power tool has an AC/DC power cord for charging in vehicle
Auto tool features a hi-impact blow mold case
Inflation up to 260PSI
12V DC output socket with overload protection built-in
Work/emergency light
Charging level/battery condition indicator
Heavy-duty 400AMP colored cable
Rubber insulated heavy duty 400 AMP booster clamp
Safety on/off switch
25-inch air hose with universal adaptor
Three additional adapters for multi-use
Continuous wall-charger
350 cranking amps

225-piece O-ring Assortment Set

225 quality rubber o-rings perfect for plumbing, mechanical and automotive repair
Set includes 18 of the most-commonly used sized rings
Re-sealable see-thru carry case makes it easy to identify sizes and keep rings organized
Essential hardware set for use with sheet metal or other thin material

Sizes:

Ten (10) 2.3 mm (inner diameter) x 5.8 mm (outer diameter)
Twenty (20) 3.1 mm x 6.2 mm
Twenty (20) 3.9 mm x 7 mm
Fifteen (15) 5.4 mm x 8.6 mm
Twenty (20) 4.7 mm x 7.8 mm
Fifteen (15) 7.8 mm x 10.9 mm
Fifteen (15) 6.2 mm x 9.4 mm
Ten (10) 9.4 mm x 14 mm
Ten (10) 9.4 mm x 12.5 mm
Ten (10) 14.0 mm x 18.8 mm
Ten (10) 12.5 mm x 17.2 mm
Ten (10) 10.9 mm x 15.6 mm
Ten (10) 15.6 mm x 20.3 mm
Ten (10) 15.6 mm x 18.8 mm
Ten (10) 17.2 mm x 21.8 mm
Ten (10) 20.3 mm x 26.5 mm
Ten (10) 18.8 mm x 23.4 mm
Ten (10) 18.8 mm x 25.0 mm

2300-watt Gasoline Generator

Enhance your car's power with a 2300-watt gasoline generator
Automotive tool boasts 10 hours of run time at full load on a 3.2-gallon tank of fuel
Auto part features a rated frequency of 60 Hz
Powerful 5.5 HP, 4-stroke/air cooled OHV engine
(2) 120-Volt AC outlets
(1) 12-volt and 10 AMP DC outlets
Recoil starter
Rated voltage: 120 volts, rated current: 16.7 AMP, noise rating: 70 dBA